In the Box
Synco WMic-TS 2-Person Camera-Mount Wireless Omni Lavalier Microphone System for Cameras and Smartphones (525 to 554 MHz)
2 x Bodypack Transmitters (TX)
Camera-Mount Receiver (RX)
2 x Lavalier Microphones
2 x Lavalier Foam Windscreens
3.5mm TRS Coiled Output Cable for Cameras
3.5mm TRRS Output Cable for Smartphones
3-in-1 USB Charging Cable
Carrying Bag
The Synco WMic-TS is a clear-sounding, easy-to-use wireless lavalier microphone system with two microphones and just one receiver. It provides vloggers, mobile journalists, Youtubers, and videographers with a complete solution for recording dialogue, interviews, and speech with two persons talking simultaneously—directly to a mirrorless/DSLR camera or a smartphone equipped with a headphone jack.
The lightweight WMic-TS consists of two compact transmitters each with its own built-in microphone and a separate omnidirectional lavalier microphone. When using the lavalier mics, the transmitters can be clipped on your belt. When using the built-in microphones, the transmitters can be positioned on a table for sit-down interviews or held in hand and operated as handheld microphones.
Also compact, the receiver mounts on your camera shoe. It plugs into your camera or mobile device using the included 3.5mm TRS or TRRS cables. A headphone jack allows you to monitor the audio from both transmitters in real time to ensure that you are capturing a clean signal. The 15-level gain control lets you to adjust your recording level to accommodate audio ranging from quiet speaking to booming sounds.
The system provides up to 8.5 hours of continuous use on USB-rechargeable batteries at a range up to 492'. You can choose from 60 frequencies to find a clean channel and avoid interference, and up to 12 WMic-TS can be deployed simultaneously in the same location if more audio channels are needed.
Save Space on Your Shooting Rig
The two-channel receiver allows you to save space on your shooting rig by using a single receiver to simultaneously accept signals from two transmitters/microphones.
Built-In Mic for True Wireless
The transmitter is equipped with a built-in microphone and a 3.5mm mic input that accepts the included lavalier microphone.
For a truly wireless experience, the transmitter can be clipped on clothing without having to wire yourself or your talent.
Lavalier Mic Included
For a more discreet setup, use the small lavalier microphone, which can be easily concealed away from the camera's eye.
Bright OLED Displays
The large OLED displays make it easy to see vital information, such as battery status, audio level, and group/channel selection—even in bright sunlight.
Mono and Stereo Recording
You have the option to switch between a mono or a stereo output on the receiver. Recording in mono combines both microphones on both the left and right side of your audio track. Recording in stereo puts one person on the left and the other person on the right, allowing you to isolate each person's dialog and adjust each level individually later in post.
Clear and Reliable Synco Wireless Technology
Synco wireless LinkLable technology analyzes and calculates the frequency data using built-in smart chips to deliver a clear transmission at up to 492' (line-of-sight) or 262' (with obstruction).
The transmitters are equipped with a selectable high and low RF transmission setting, so you can use a more powerful setting for longer distances, or a lower setting for shorter distances and longer run time.
At a Glance
Low-cut filter helps reduce unwanted wind and traffic noises.
180° foldable antennas make it easy for users to carry the system around.
Headphone jack for monitoring in real time.
15 levels of gain control.
The transmitters and the receiver are powered via a built-in lithium-ion rechargeable battery.
8.5 hours of operating time on a full charge.
Includes 3-in-1 USB charging cable.
